bebeduE HAKKA, Instructions Manual

Page: 29 / 72

29
E UK
Fold the canopy:
IMPORTANT: Pull the canopy in the direction indicated by the arrow to fold it (Fig.17)
Folding the pushchair:
Press on the pushchair’s fold button (Fig.18-A) while simultaneously pulling on the
second fold buttons (B) located on both sides of the handle (Fig.19).
The pushchair will then fold down automatically (Fig.20).
Make sure the pushchair continues folding until the fold hook is fixed in place (Fig.21).
FRONT WHEELS
The front wheels can be removed by pressing on the small plastic part, (Fig.22). This
pushchair has swivel wheels which can be locked/released by simply pressing on the
front wheel locking lever. Lock the front wheels by pressing on the lever for use on rough
ground and release them by lifting the lever for use on smooth surfaces (Fig.23).
BRAKES
To use the brakes, press firmly on the brake lever (Fig.24). Press the brake lever in the
same way to release the pushchair. Whenever you stop, make sure the brake is on. To
prevent accidents, do not park the pushchair on a slope.
IMPORTANT: After activating the brakes make sure the wheels are
blocked.
FOOTREST
To adjust the footrest to the desired position, press the two footrest buttons simultaneously
(Fig.25). Simply pull the footrest upwards; it will come up automatically (Fig.26).
BUMPER BAR
To remove the front bumper bar, press on both buttons simultaneously, pulling outwards
(Fig.27).
CANOPY
To remove the canopy, lift the canopy clamps on both sides (Fig.28).
ADJUSTABLE HANDLE
To adjust the handle to the desired position, press the handle button; there are three
possible positions (Fig.29).
ADJUSTING THE BACK SUPPORT
There are four possible positions for the back support. To raise it, push it upwards to the
desired position; it will lock in place automatically (Fig. 30). To lower it, lift up the back
support button and then pull downwards (Fig. 31).
SAFETY HARNESS
This pushchair has a safety harness anchored at five points.