ASSEMBLY / OPERATING INSTRUCTIONS
To fit the Drop Side Panel continued...
To attach Feet to Base...
3
1
2
4
Slide the drop side up to allow the locating pin to
match up with the small track on the drop side.
Move end panel outwards and release when it
locates in the track.
Repeat for other end.
Use eight x 25mm bolts to connect the feet
between the fixed side and the lower support
rail.
Ensure the feet are facing towards the end of the
cot.
Turn the cot back on to its feet and tighten all bolts
until firm.
Remember to replace mattress base bolt, insert
and tighten 35mm bolt to lower support panel.
3a.
3b.
3c.
1a.
1b.
2a.
4a.
WARNING!
Do not over tighten bolts. Over tightening bolts can cause panels to
crack.
The cot is now ready for use.
