ASSEMBLY / OPERATING INSTRUCTIONS
To lower Mattress Base Height...
To convert to Cot/Bed Mode...
1
1
2
2
Remove the two filling bolts and nuts from each
of the end panels.
Lay down the cot on the fixed side panel.
Loosen both upper mattress base bolts 6 turns.
Lay the cot down with drop side facing up.
Remove lower support rail bolt on one end of
the cot.
Carefully move end panel outwards to release
the locating pin from the track.
Repeat for other side.
With both locating pins released, slide the drop
side panel down to release the plastic guide at
the end of the track.
Lift drop side panel off.
Remove the four mattress base bolts from the
end panels.
Carefully slide the base to match the lower
holes and replace mattress base bolts.
1a.
1b.
1a.
1b.
2a.
2b.
2c.
2d.
2e.
2a.
2b.
PLEASE NOTE!
Re-fit filling bolt and nut to the higher base positions to
prevent possible finger entrapment.