!
Align the mark on both
mounts with the center
mark on the fire-wall
1
Place the magnetic plywood ring
on to the fire-wall as shown.
2
Securely attach the engine mount to the
fire-wall using the four 4x25mm screws.
Position the engine on the engine mount beams so the
distance from the prop hubto the fire-wall is 90mm/3.5”
in case of 2T engine or 97mm/3.8” in case of 4T engine.
97mm
4
Trim the cowling for
engine and muffler.
Then, position the cowling
in place
Fix the cowling with the magnetic
plywood ring using litter CA glue.
Remove the cowling and glue with
Epoxy glue.
CA
A B
Magnetic plywood ring
FRONT VIEW
A
A
7
Note the side thrust for motor!
Sturz und Zug beachten!
1- Engine and Cowling / Motor und Motorhaube
70mm
2.8 in.
Cut here on
both mounts.
3
5
6
