Ultrasound cavitation system 3in1 BeautyRelax BR-720
User Guide
11
1.
If you feel bad when using the machine or there are unexpected medical
complications, operation immediately turn off and further use consult your doctor.
2.
If you want to place the electrode to another part of the body, first turn off the
device operation. Then you can safely move the electrode and restart the device.
In recognition of the third to ensure maximum effectiveness of the device, turn off all
electronic devices that may be using (MP3 player, cell phone during a call).
4.
The unit should not be used in sleep when you're not able to have full control of the
unit. This could result in serious injury.
5.
Electrode use in one place for more than 30 minutes.
6.
Ensure that during use, the electrode is not in contact with the metallic conductive
objects (such as necklaces, bracelets, rings, ...)
Notice
Do not put the electrode pads on body shown in the above combinations.
Electrical impulses would flow directly through the heart, which is strictly
forbidden!
Ultrasound cavitation system 3in1 BeautyRelax BR-720
User Guide
12
How to use electrostimulator function
1. First, thoroughly clean the skin where you will apply the gel electrode. This is very important for
the correct transmission of pulses through the skin.
2. Each electrode plug to the flat connector.
3. Electrodes stick to the body part that you want to treat.
4. Cable electrodes connect to the device. Socket is positioned below the surface of the applicator
head cavitation.
5. Before switching on, make sure the side button on the value of the 0.
6. Once you will connect device to the electric socket, press POWER button.
(POWER button lights up)
7. Press the button EMS (electrostimulator function is ON).
8. The electrical pulses begin to flow through to the skin as soon as you set on the side 1.
9. On the other side of the device, select the mode of electrical pulses that suits you best. There are
the following:
These modes are useful for muscle relaxation:
TAPPING
MASSAGE
KNEAD
These modes are suitable for active muscle strengthening:
SCRAPPING
SLIMMING
10. During the treatment by electrostimulator you can change the EMS function:
(TAPPING, MASSAGE, KNEAD, SCRAPPING, SLIMMING). You can change the power level of the EMS
function also (0 - off,1,2,3,4,5).
1.
Electrostimulator will switch off after 10 minutes automatically or you can switch it off by
yourselves by the pressing EMS (LED button will lights off).
Note: If you're starting with the device, we recommend that the length of the application of 10
minutes, 20 minutes later. Never use electrical stimulation in one place for more than 30 minutes!
