GT-25 Chuck
6
Beatfoxx GT-25 Chuck
2020-05-28
TURNTABLE OPERATION
1.
Turn the On/Off-Knob to switch on the device.
2.
Turn the Phono Speed Selector to the correct speed (33 1/3, 45 or 78 rpm) for the
selected record size.
3.
Take out the Magnetic Record Holder, place a record lightly on the Turntable and put
the Magnetic Record Holder back in place to fix the record.
4.
Remove the stylus protector.
5.
Release the Tonarm lock and lift the Tonearm with the lever.
6.
Move the Tonearm over the record to where you want it to start playing.
7.
Move the Tonearm Lever to the lower position. The Tonearm slowly lowers onto the
record automatically.
8.
Turn the Volume-Knob to adjust the desired volume.
The Tonearm stops automatically at the end of the recording.
BLUETOOTH FUNCTION OPERATION
1.
Turn on the turntable and turn the Volume-Knob to the desired volume level.
The Bluetooth function is set to receive mode when the turntable is
switched on. Make sure the tonearm is in the resting position. A short
Bluetooth start tone can be heard.
2.
Turn on your Bluetooth device. It will appear as "Beatfoxx GT-25" when it is recognized
by Bluetooth on your turntable.
3.
If you are asked for a password enter the password "0000" to pair the turntable and the
Bluetooth device
When the turntable is paired with your Bluetooth device, you will hear a
short ton from the speakers.
4.
Operate your Bluetooth device as usual and the sound is played through your
turntable. Enjoy the music.
A.
Make sure your Bluetooth device and this unit is within 33ft
B.
Check and see if there are other Bluetooth devices nearby
interfering the signal and connection.
C.
This unit is could be paired by multiple different Bluetooth devices,
but could only be connected and played by one of them at a time.
Make sure no others device is actively connected to it already when
you are trying to connect the one you are working on.
