GT-25 Chuck
2020-05-28
Beatfoxx GT-25 Chuck
5
WALL MOUNTING VERTICAL
1.
Wall 2 longer black screws for
neck fixation at Guitarhousieng
2.
Wall Inserts (dowels);
3.
Wall Bracket;
1.
Hold the turntable against the wall where you want to place it.
2.
Mark the middle of the turntable at the top with adhesive tape and set the turntable
aside.
3.
Place a mark 5.25" (13.3 cm) down from the adhesive tape.
4.
Hold the wall bracket so that the top edge of the wall bracket is on the mark.
5.
Mark the locations for the holes on the wall. The markings should correspond to the
openings on the wall bracket.
6.
Drill the holes at the marked locations on the wall (1 /4" drill).
7.
Insert the four dowels into the holes. The open end of the dowels must be flush with
the wall surface.
8.
Tighten the wall bracket with four wall screws.
9.
Use the 2 longer black screws to fixate the neck at the backside of the Guitar-housing
10.
Hang the turntable vertically on the mounted wall bracket.
