20
English
Note: The solar light does not require a power source. However, since the light
depends on sunlight, please note the following:
•
Make sure that the solar cells get sufficient light during the day. Place the so
-
lar panel in a sunny spot. Choose a spot where the panel is exposed to direct
sunlight during the day for as long as possible.
•
Avoid an installation site that is entirely or predominantly in the shade.
•
In the dark, the light should not be constantly exposed to other light sources.
•
The solar module should always be kept free of snow during winter. Remem
-
ber that reduced sunlight results in shorter lighting duration.
4. Initial use and installation
1.
Take the device out of the package and remove all the packaging material.
Please remove the protective film from the solar panel before using it.
2.
Lay the LED string light out. Find a suitable spot with adequate sunlight.
3.
Now lay the string lights, for example, around a bush or shrub. Make sure
that the lights are not immersed in water (e.g., garden pond).
4.
Press the switch at the back of the solar panel. The string light is switched
on in the "ON" mode (continuous light). If you press the switch again, the
"FLASH" mode (flashing light) is activated. The string lights will flash contin
-
uously. If you press the switch again, the string lights is switched off ( "OFF"
mode) and the battery is not charged.
1
Mode 1: ON for continuous light
2
Mode 2: FLASH for flashing light
3
Mode 3: OFF for switched off state
5.
Insert the housing into the soil or a flower pot using the included ground
spike.
