bottom skirting
60.
Position Door Panel with a 1/2” gap on bottom,
and evenly spaced on sides. Attach bottom Hinges to
Narrow Trim with 2” black screws. Use extra piece of
siding to help keep the door evenly spaced on
bottom. See
Step 61
for gap at top.
Hint:
Do
not attach all the 2” screws until both doors are
positioned correctly. Use a Screw Driver to tighten
screws completely.
Door
1/2” gap at
b o t t o m .
E v e n l y
spaced on
sides.
Door
Trim
2” Black Screws
59.
With Hinges attached, position door in opening. Use Shim Shingles to establish gap.
61.
Make sure Door Panel is aligned
evenly at top and edge. When aligned
correctly, attach top and middle hinges to
narrow trim with hinge hardware provided.
62.
Locate and identify all Facia pieces.
Front Facia
is 4” wide while
Rear Facia
is 4 1/2” wide.
Side
Angle Cut Facia
is angle cut on both ends. In front corner
,
align side and front Facia together
.
Front Facia
Side Angle
Cut Facia
Important -
Drill
Pilot Holes to
prevent splitting.
Toll Free 1-877-232-7428 www.bearicuda.com [email protected]
Page 24
Use Shim
Shingles to
gap door
correctly.
