BearCreeks iPilot20 Bait Boat User Manual
9
2.
Switch on the handset by a Long Press on the power button in the handset
.
3.
Switch on the boat by pressing the power button on the boat.
4.
Make sure the connection between the boat and the handset is built up. if the connection is build up, when turning the right joystick forward, the motors
will respond.
5.
Put the boat into the water and keep it 2 meters away from the bank.
6.
Long press of the light button
, the boat will start to calibrate automatically. A sound from the handset will tell you when the calibration is ready.
7.
Save the home spot by a Long Press or double click on the Home Button
. When the home spot is not saved, the handset will alarm with beeping
sound. You need to save home spot only once unless you want a new home spot to be saved.
8.
Push the right joystick forward, backward, left or right to control the direction of the boat. When push the right joystick forward for 5 seconds, the boat
will enter into auto-run mode then you can get your hand free and the boat will run forward by itself.
9.
Drive the boat away, for example 100 meters from home spot, stop the boat with right joystick. Select 1 of the 25 numbers by moving left joystick, let’s
say number 5, Long press or double click the button
to save the spot to number 5. Continue driving the boat to another spot and save it to spot
number 9. Now you have saved two fishing spots. You can save up to 25 fishing spots on the water.
10.
Press button
to release the bait from bait hopper and
to release the hook or rig.
