1.
MOTONO PLATFORM INTRODUCTION
Thank you for purchasing a Motono Dirt Bike platform a part of the Bear Bones
System’s family of products. The Motono platform is used to lift dirt bikes for
storage or for conveniently positioning a bike for maintenance or servicing.
2.
SAFETY
2.1.
Never place your body beneath a suspended load.
2.2.
Never exceed the weight capacity of the Motono Platform which is 400lbs
2.3.
Be aware of the general envelope of the bike being lifted to avoid collisions
with surrounding items or ceilings.
2.4.
Use the included foot peg fasteners to keep the bike from tipping forward. If
your bike happens to sit on the Motono platform in a way that allows it to
rock to the rear, use a tie down strap to secure the front of the bike’s frame
to the front cross channel of the Motono platform.
3.
USING THE MOTONO PLATFORM
1.
To lift one dirt bike or the first dirt bike with the Motono Platform, lower the
empty carriage using the hoist until the top of the receiver tube is below the
height of the belly of the bike.
2.
Position the dirt bike in front of the Ascension column with the center of
the engine roughly aligned with the center of the column and the center of
the bike roughly 15” from the front of the Ascension column.
3.
Lean the bike’s handlebar against the wall and insert the Motono Platform
tube fully into the carriage receiver.
