Beamz 150.666, User Manual

Page: 3 / 12

- 3 -
UNPACKING INSPECTIONS
Unpacking instructions

Please unpack the carton and check the goods carefully when you receive it , if discover
packing damage, shortage or quality problem, please notify the shipper and reject the goods.

Before using this product, please read the instructions carefully and keep it in a safe place for
future reference.
Checking the contents of the carton:
The product, Power cord, Instruction Manual
SAFETY INSTRUCTIONS

Safety and regulatory power socket with high quality output should be used .

Always connect the product to a grounded circuit to avoid the risk of electrocution.

Never put tiny metal objects such as a screwdriver, iron wire and coins, etc. into the internal or
stretch into the machine in case of short circuit .

Please make sure to connect the proper voltage and do not higher or lower than that stated on
the decal or rear panel of the product .

Avoid hitting, crashing or squeezing with other objects in transportation. Never carry the
product from the power cord or any moving part . Always use the hanging / mounting bracket
or the handles.

The product is used in door only .

Never pull or tug on the cord and change it for another one , stop using it when it is damaged
or becomes hot .

Stop using the product once there is sparks when connecting with the power plug .

Can not operate product with wet hands and never place it near the water or other liquid.

Make sure there are no flammable materials close to the fixture while operating . Always install
it in a location with adequate ventilation.

Never replace the lighting source with different specification and rating when the original one
is damaged.

Make sure to power off before replacing the light source or the fuse. Never do it while it is on.

The ambient temperature is no more than 40°C(104°F) .

Never clean the fixture by water, thinner or other dissolved agent .

Stop using the product in case of a serious operating problem and send it to our maintenance
agent immediately. Never repair by non-professional workers .

Avoid direct eye exposure to the light source while the product is on.