manualshive.com logo in svg

Beam Terra 800, Installation And User Manual

Share
Download
Beam Terra 800 Installation And User Manual Download Page 23

BEAM Terra 800 - Installation & User Manual

23

10) Connecting Power to Terra 800

The Terra 800 can be powered from the supplied 
AC Plug pack, or connect to an external 10-32V 
DC power source.

D

ISD950 AC Plug Pack Installation
For installation using ISD950 110-240 AC plug 
pack, connect the 4-way Microfit connector from 
the plug pack  to the 4-way power connector on 
the rear of the Terra 800. In this configuration the 
status is always ON.

DC Power Source Installation

The DC power cable has three wires, RED, BLACK 
and YELLOW. The RED and BLACK wires are used 
for the power connection while the YELLOW 
wire can be connected to a switch.  
By default, the Terra 800 will stay on for 20 
minutes when this input (YELLOW wire) is 
switched off before entering into sleep mode. 
(This timer is able to be configured in Falcon. If 
a call is in progress while this occurs, the Terra 
800 will stay on for 20 minutes after the call 
is terminated. Please follow the steps below 
to connect the DC power cable to the battery 
power and the Terra 800.

1. 

Route the wire end of the DC power cable to 
the connection point. 

2. 

Connect the BLACK wire to the negative 
terminal of the battery.

3. 

Connect the RED wire to the positive 
terminal of the battery. It is recommended to 
add the 5A fuse (supplied) between them. 

4. 

Connect the YELLOW wire to a switch. It is 
recommended to add a 1A fuse between 
them. If the SLEEP function is not required, 
the YELLOW wire MUST be connected to 
the RED wire permanently 

5. 

Connect the 4-way Microfit connector on 
the DC power cable to the 4-way power 
connector on the rear cable loom of the 
Terra 800 unit.

RED 

(+) Vin 10 to  32VDC

BLACK 

(-) OV Power Ground

YELLOW   ON/SLEEP

 

To Battery Positive Terminal

(Requires 5A Fuse)

To Negative Terminal or chassis

To ON/OFF switch

(1A Fuse recommended)

YELLOW

BLACK

RED

Summary of Contents for Terra 800





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands