![Beam RST625 Installation & User Manual Download Page 20](http://html.mh-extra.com/html/beam/rst625/rst625_installation-and-user-manual_2716621020.webp)
RST625 INSTALLATION & USER MANUAL
REV 03
20
Emergency Number Dialing
Refer to your service provider for availability of this service.
Call a Number in a Message
Ending a Call
To end a call, perform one of the following tasks:
•
Press C
or if
End Call?
appears
press
OK
•
Replace
the
handset
in the hang-up cup, for an in-vehicle installation
Receive a Phone Call
To receive a call, your phone must be powered on, have a SIM card inserted,
be unlocked, and be in contact with the satellite network. See "Accessing the
Network" for network information.
Receiving A Personal Call on the handset:
1. In call alert, remove handset from hang-up cup
2. Call should answer if removed from hang-up cup
3. Direct
your
conversion to the handset
4. To end call
End Call?
appears
press
OK
5.
To end call press
C
Unanswered Calls
If you are away from your phone or choose not to answer a call, your phone
displays
the message Unanswered Cal 1.
Voicemail Mailbox
Callers who are unable to reach you can leave voice messages if this feature
is active. You will also need to ensure your diversions have been set to
perform this. The next time you register with the satellite network, you will
receive notification of voice messages being left in your mailbox / voicemail.
Changing From Private to Headset
1.
Remove the handset form the cradle, for privacy mode
2. Replace the handset into the hang-up cup, you are now in direct
conversation with Headset Speaker & Mic
NOTE: It is possible to switch between hands-free and private mode
without terminating the call.