manualshive.com logo in svg

Beam RST625, Installation & User Manual

Share
Download
Beam RST625 Installation & User Manual Download Page 13

 

RST625 INSTALLATION & USER MANUAL 

REV 03 

13

 

 

OPERATION OF THE RST625 

Now that you have completed all installation steps, follow these steps: 
 

1. Ensure that the antenna is located in an area where quality signal is 

available. 

2. Ensure that the Intelligent Handset is plugged into the system (either 

directly, or by using the 2m optional extension cable). 

3.  Ensure that the power cable (either AC or DC or both) are plugged in.  If 

using the DC cable, ensure that the plug is firmly asserted into the cirgarette 
lighter. 

4.  Turn on the system Power switch to On (up) position. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
5.  After about 5 to 10 seconds, the handset should now be on, and displaying 

the status of satellite network search. 

6.  Wait for the system to register on the Irdium network (20 to 40 seconds). 
7.  You are now ready to make and receive calls. 

 

Use of Handsfree and Handset 

Dialing or answering a call can be done when the handset is in or out of the cup 
(cradle).  For handsfree operation, the handset MUST be in the cup. 
The audio will be routed to the handset ONLY when the handset is out of the cup.  
Putting the handset back in the cup will return the audio routing to the headset. 
 
The handset can conveniently be plugged in and out of the cup during a call, without 
the call being dropped.  To hang-up a call, press the “end call” button on the handset. 
 

Checking Performance after Installation / Making Calls

 

To confirm that the phone is working properly, make and receive a satellite phone 
call: 

Battery/External

 Switch: 

 

Battery

 – unit it powered 

via the battery only.  
Charging is DISABLED. 
 

External

 – unit is 

powered from 

External 

10-32VDC

 Port.  

Charging is ENABLED if 
separate Charger pack is 
plugged in. 

Summary of Contents for RST625











































Reviews:

No comments

Brands by name

Popular brands

Load more brands