8
the power unit, check all the inlet valves and
remove obstructions.
The hose handle may
be equipped with an
optional on-off switch
or variable speed
switch. It is used to
control the start and
stop of the power
unit while the hose is
plugged into an inlet
valve. This allows you
to control the system without unplugging the
hose.
Motor Protection Shutoff
In the unlikely event that something causes the
unit to turn on, or if the unit is unintentionally
left on, your central vacuum has been
developed with a motor protection shutoff.
After 30 minutes of continual operation the
power unit will automatically shutoff, preventing
damage to the motor. To restart, remove the
hose from the wall inlet and reinsert, the power
unit should come back on.
Cleaning tools
The BEAM hose and attachment set comes
with a telescopic wand and a variety of
cleaning tools allowing you to clean virtually
any surface from floor to ceiling. The tools can
be used with the wand or directly on the hose
handle.
The combo tool is
used for all-around
floor and general
cleaning and is used
about 80% of the time.
It allows you to move
from carpets to hard
floor surfaces without
stopping by switching
the convenient toe
switch on top of the
tool.
The round dusting
brush makes dusting
quick and easy. It can
be used for furniture,
counters, wall
decorations, window
areas, lamp shades,
or wherever dusting is
needed.
The upholster nozzle
with slip-on brush
is convenient when
cleaning walls,
furniture, curtains, or
mattresses. It can be
used with or without
the slip-on brush.
The crevice tool is
ideal for tight spaces
and corners, such
as in the kitchen
and beneath/around
cabinets. It is designed
for narrow spaces,
crevices, along edges
or other hard-to-clean
areas.
The snap-on, three-
tool caddy allows you
to carry our most-used
tools directly on the
wand.
The hose hanger is
used to easily coil and
store the hose in a
closet.
Figure 5
