Iridium Extreme PTT Grab ‘N’ Go Grab ‘n’ Go Kits User Manual
29
If you use the desktop charger to charge the handset, make
sure that the power adapter is fully assembled before you plug
it into a power outlet. Then insert the AC/DC plug pack firmly
into the power outlet. Do not connect or disconnect the AC/DC
plug pack with wet hands. The AC/DC plug pack may become
warm during normal use. Always allow adequate ventilation
around the AC/DC plug pack and use care when handling.
Unplug the AC/DC plug pack if any of the following conditions
exist:
1. The power cord or plug has become frayed or damaged.
2. The adapter is exposed to rain, liquid, or excessive
moisture.
3. The adapter case has become damaged.
4. You suspect the adapter needs service or repair.
5. You want to clean the adapter.
Cleaning your Wireless PTT Handset:
Clean the Wireless PTT Handset immediately if it comes into
contact with any contaminants that may cause possible
malfunctions—for example, ink, dyes, makeup, dirt, food, oils,
and lotions. To clean the handset, unplug all cables and turn off
the handset (press and hold the manual On/Off button). Then
use a soft, slightly damp cloth. Don’t use abrasive household or
industrial cleaners, aerosol sprays, solvents, alcohol, ammonia
to clean the Wireless Handset.
Carrying and handling Wireless PTT Handset:
The Wireless PTT Handset contains sensitive components. Do
not drop, disassemble, microwave, burn, paint, or insert foreign
objects into handset. Do not use the Wireless Handset if it has
been damaged—for example, if the Wireless Handset is cracked,
punctured, or damaged by water.
Connectors and Press Buttons:
Never force a connector into a port or apply excessive pressure
to a button, because this may cause damage that is not
covered under the warranty. If the connector and port don’t
join with reasonable ease, they probably don’t match. Check
for obstructions and make sure that the connector matches
the port and that you have positioned the connector correctly
in relation to the port. Not all Hirose 6 pin accessories are
fully compatible with Wireless PTT Handsets. Under some
conditions, certain accessories may affect Wireless PTT Handset
performance. Reorienting or relocating the handset and the
connected accessory may improve wireless performance.
Connect your BEAM Reseller for advice.
Acceptable Temperature Extremes:
The Wireless PTT Handset is designed to be normally operated
and stored in temperatures between -20ºC and 50ºC (-4º to
122ºF). Lower or higher temperature conditions might shorten
battery life or cause the handset to temporarily stop working
correctly. Leaving Wireless Handset in a parked vehicle or in
direct sunlight can cause handset to exceed these storage
or operating temperature ranges. Avoid rapid changes
in temperature or humidity when using the handset, as
condensation may form within the unit. When you’re using the
Wireless Handset or charging the battery, it is normal for Wireless
Handset to get warm. The battery will only charge when its
ambient temperature is within its safe limits of 0ºC - 45ºC.
