Iridium Extreme PTT Grab ‘N’ Go Grab ‘n’ Go Kits User Manual
21
DriveDOCK Extreme Button LED Status (Phone Mode)
LOCATION
BUTTON MODE
ACTION
LED/SOUND
Mute press
On/off
In a Call:
Mute the microphone
(uplink) on the Hands-
free, optional privacy
handset, or optional
Intelligent Handset
LED turns RED
Muted
LED turns OFF
Not muted
OR
Up/Down
In a Call:
Increase/decrease
volume on the audio
device in use
Audio will
sound louder/
softer with each
press.
Out of Call or Incoming
Ring:
Increase/decrease
volume of incoming ring
tone on the external or
internal speaker. (The
lowest setting will silence
the Ringer)
A beep
will sound
indicating the
increased/
decreased ring
tone volume of
the external or
internal speaker
– whichever is
currently set by
the Ring (Bell)
button.
Brightness Mode:
Increase/decrease the
LED intensity
All Button LEDs
brightness will
be increased/
decreased with
each press.
+
Brightness -
dual button
simultaneous
press (2
seconds)
Out of Call:
Enter LED brightness
change mode. Then Press
UP and/or DOWN arrows
to vary intensity.
Mode will automatically
exit after 5 seconds after
the last button press.
Status LED
flashes YELLOW
3 times and all
Button LED’s
will change
WHITE. A single
beep will sound
when entering
brightness
change mode.
A short double
beep will sound
when exiting
change mode.
LOCATION
BUTTON MODE
ACTION
LED/SOUND
Ringer
Single Press
Not in Call:
Cycle through the
ring tones and
the output device
(internal buzzer and
external speaker).
The last Ringer type
sounded is then
saved.
Ring tone
playback and the
output device
changes. LED
FLASHING (fast)
BLUE when ring
tone is sounded.
3 Second Press
Cycle through
audio speaker and
mirophone options
• PTT/Privacy
Handset
• PTT/Privacy
Handset and
handsfree
speaker
• Handsfree
speaker and
microphone
3 rising beep
sounds
Single Press
(no beep
sound)
When Bluetooth®
is OFF:
Turns ON
Bluetooth® function
LED changes
from OFF to FAST
FLASHING in BLUE
when searching
Bluetooth®
device(s). LED
turns solid BLUE
when connected
If Bluetooth®
connected but
NOT used in Call:
Transfer the audio
to the Bluetooth®
device
LED changes from
Solid BLUE to
SLOW FLASHING
in BLUE
Bluetooth® Device
being Used in Call:
Transfer the audio
to HF mode, or
Privacy/Intelligent
handset if activated
LED changes from
Slow Flashing to
solid BLUE
DriveDOCK Extreme Button Action & Response
(Phone Mode)
