Look foward to it.
9
Descale, Rinse, Ready
Cleaning and Care
Open the cover of the
reservoir and empty
Fill the reservoir with
0.5 litres of recommended
descaler* and close
the cover
Plug in the power cable,
switch on main switch.
*QR-Code: Ordering link
for descaler
Rec. descaler item no.: 8050
Internet shop www.beam.de
Hold down the “Steam”
control button for approx.
10 seconds to start the
descaling programme.
Listen to the pump at regular
intervals.
Do not switch off or
unplug the appliance.
There will be a beep after
approx. 15 minutes as well
as a visual signal – end of
descaling
Do not switch off or unplug
the appliance.
Now perform the “Rinse”
stage
Find a suitable container. Hold the
appliance over the container and empty
the boiler by opening the drain plug. Then
close it again tightly,
and switch off the main switch!
Empty the reservoir
Warning: Descaler residue can
be harmful.
Fill the reservoir with 1 litre of clean tap
water.
Plug in the power cable, switch on
main switch!
Hold down the “Steam” control button for
approx. 10 seconds to start the rinsing
programme.
Do not switch off or unplug the
appliance.
There will be a beep after approx.
15 minutes as well as a visual signal –
end of rinsing programme
Do not switch off or unplug the
appliance.
Find a suitable container. Hold the
appliance over the container and empty
the boiler by opening the drain plug. Then
close it again tightly,
and switch off the main switch!
Empty the reservoir
Warning: Descaler residue can be
harmful. Rinse out carefully to get rid
of any residue
.
Your beam steam cleaner is now ready
for use again.
After a set operating period the appliance will alert you that it needs to be descaled when it is switched on.
When this happens the appliance will be inoperable for approx. 5 seconds and the LEDs on both control knobs will flash
in sequence.
Warning!
Descalers can be harmful. Read the information on the descaler packaging and follow the safety instructions.
Descalers or vinegar may cause damage to surfaces. Wipe up drops immediately. Only use suitable and
recommended descalers.
Only perform descaling on a
cooled
appliance.
Warning!
Do not operate the appliance before the complete descaling and rinsing programme has been performed.
If the descaling and rinsing programme is interrupted the entire process must be repeated.
Descaling
Rinse
(perform 2 x)
15 min.
15 min.
Fill
with
water
