manualshive.com logo in svg

Beam DriveDOCKExtreme, User Manual, Page: 52 / 64

Share
Download
Beam DriveDOCKExtreme User Manual Download Page 52

52

AT Commands 

When utilizing the USB data communication port, the DriveDOCK Extreme 
cannot activate AT commands that could interrupt the docking station’s 
synchronization with the Extreme handset. Therefore, the DriveDOCK 
Extreme will block or limit AT commands that could cause any adverse 
effects to the functional operation of the cradle. Please refer to the Iridium 
“ISU AT Command Reference” document for more details on the AT 
commands supported by Iridium.

 

www.beamcommunications.com/support/iridium

The document is located under 

Common Resources

 then “Iridium AT 

command guide.” 

The following AT commands are affected:

AT COMMAND

CRADLE DEFAULT 

STATUS

LIMITATION

AT+IPR

6,0

Auto-baud is permanently 

disabled with the default 

baud rate set to 19200.

ATEn

1

Echo is on permanently 

enabled

ATVn

0

Numerical responses only

AT&Cn

0

DCD is forced on at all times

ATQ1

1

ISU responses are not sent 

to the DTE

AT&F0

-

Blocked

AT&W1

-

Blocked

AT&Yn

-

Blocked

Summary of Contents for DriveDOCKExtreme

































































Reviews:

No comments