15
6.2. Replacement of dust collection bag
The dust collection bag inside the separator must be replaced at periodic intervals, as indicated in the
“Periodic operations” chart on the previous page.
CAUTION:
•
Before proceeding with replacement operations, a protective mask and gloves must be used.
•
Use only original spare bags by BEAM Electrolux.
•
Failure to use these items of personal protection equipment may expose the operator to the risk of
inhalation of dust that is harmful to health, or of the contact of allergenic substances with the skin.
•
Before proceeding with replacement operations, the power supply cable must be unplugged.
Failure to comply with this instruction may expose the operator to the risk of accidental system
starting.
•
While the dust container is being hooked up, there is the risk of cutting injuries to the fingers.
•
After completing any maintenance operation, remember that the vacuum unit must not be
restarted before the filter cartridge is mounted correctly.
The replacement procedure for the dust collection bag is as
follows:
1.
Unhook the lower module of the separator by raising the
handle.
2.
Extract the lower module of the separator by allowing it
to slide on its wheels with the assistance of the handle
provided.
3.
Extract the dust collection bag and replace it with a new
one.
4.
Fold the edges of the bag towards the exterior.
5.
Hook up the dust container again to the separator. If
it is necessary to move the dust container away from
the separator to empty the dust collection bag, the
depression pipe keeping the bag in the correct position
must be disconnected.
6.3. Replacement of the filter cartridge (filter)
The filter cartridge must be checked and if necessary replaced when a progressive reduction of the
suction power of the system is noted. Replacement is always necessary after two years of use.
CAUTION:
•
Before proceeding with replacement operations, a protective mask and gloves must be put on.
•
Use only original spare bags by BEAM Electrolux.
•
Failure to use these items of personal protection equipment may expose the operator to the risk of
inhalation of dust that is harmful to health, or of the contact of allergenic substances with the skin.
•
Before proceeding with replacement operations, the power supply cable must be disconnected.
Failure to comply with this instruction may expose the operator to the risk of accidental system
starting.
•
While the dust container is being hooked up, there is the risk of cutting injuries to the fingers.
•
After completing any kind of maintenance operation, remember the suction unit must not be
restarted without first having inserted the filter cartridge inside the separator.
Summary of Contents for Commercial
Page 19: ...19 ...
