Figure 14. Connect miniDP to DP or active miniDP to HDMI Cable to the Board
The connector is fairly robust, but we suggest that you not use the cable as a leash for your
Beagle. Take proper care not to put too much stress on the connector or cable.
7. Booting the Board
As soon as the power is applied to the board, it will start the booting up process. When the
board starts to boot the LEDs will come on. It will take a few seconds for the status LEDs to come
on, so be patient. The LEDs will be flashing in an erratic manner as it boots the Linux kernel.
Figure 15. BeagleBone AI-64 LEDs
While the four user LEDS can be over written and used as desired, they do have specific
18
Summary of Contents for BeagleBone AI-64
