3
No. Component
Description
1 HDMI (or DVI-D)
Loop-back
HDMI (or DVI-D) Loop-back for Local Monitor.
Short press
Switch video to Remote or
Loopback monitor.
Long press
Output video to both Remote
and Loopback monitors.
2 (Button 1)
Press and Hold at
Power ON until
Green and Red
LED blinking
Reset the unit to the Factory
default setting
Short press
Switch to Video or Graphic
mode
Long press
(*)Anti-Dither Mode
2 (Button 2)
Press and Hold at
Power ON until
Green LED blinking
Use Loop-back EDID
3 Red LED
(System status)
Green Blinking/Red Off
: System is starting up.
Green On/Red Blinking
: Linking or waiting HDMI
input.
4 Green LED
(Power/Link
status)
Green On/Red On: Connection established.
5 Remote Power
On/Off (optional)
Provide Remote Power On/Off function.
4
6 Link ID
4 bit DIP switch for 16 ID settings. To make
Transmitter/Receiver as a pair or a group, the
transmitter and receiver must be set with the same
Link ID.
7 Gigabit Ethernet
Connects to Gigabit switch or directly to AV-950R
8 RS-232 Control
(optional)
Provide Serial-over-IP function.
9 DC 5V In
System power input port. Connect to a DC 5V 2A
external power adapter.
10 USB-to-PC
Connects this USB-B to PC to provide 2 functions:
1. USB audio device. (An USB audio device will be
detected when it is attached to PC in Windows OS)
2. Virtual 4-port USB Hub for remote USB devices.
11 HDMI IN
Connects to HDMI Source. For DVI source, you
may need a HDMI-to-DVI adapter.
12 IR Blaster
(optional)
Connects to external IR LED.
