GB
➜
Carefully wash the feeding bottle and all its accessories using a
bottlebrush and lukewarm soapy water, then rinse them thoroughly,
before you start each sterilisation operation.
➜
Using a clean feeding bottle, measure 100 ml of tap water and pour
it into the bottom of the Stéril’box (sketch 1). Attention, always
pour in exactly 100 ml of water before each sterilisation.
➜
Use the following diagrams to guide you on how to stack the
accessories. Place the main body of the feeding bottle head
downwards (sketch 2). Place the teat, then the ring, then the dome
cap as indicated (sketches 3, 4 and 5) and finally the tongs (sketch 6).
Make sure that the steam can circulate freely around the
accessories.
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE.
