d
1
4
2
5
front view
top view
PUSH BUTTONS
CURTAIN POSITION
Quickly press twice within 1 second to show the visible spots, and then adjust the tilt angle (range: 0 to +5°
)
with the
screwdriver until the visible spots are at the correct position.
Recommended position for the visible spots:
If 2 m mounting height: d≥4cm
If 3 m mounting height: d≥5cm
If 4 m mounting height: d≥6cm
If 5 m mounting height: d≥7cm
VISIBLE SPOTS
ADJUSTMENTS & SETTINGS
Quickly press the push button twice to activate the visible spots, they will help you position the curtain.
Quickly press twice
to activate or deactivate the visible laser spots
Press for 2 seconds
to launch a teach-in process
Press for 3 seconds
to confirm the setting after changing the DIP switch
Press for 5 seconds
to acknowledge the 6x flashing error message and confirm that you
want the sensor to be mounted higher than 4m. Note that the sensor
does not comply with DIN 18650 and EN 16005 above this height.
Do not look directly into the visible beams !
