3
4
FLY
ON
1 2 3
1
2
DIP SWITCH SETTINGS
ON
OFF
DIP SWITCH #1
DIP SWITCH #2
DIP SWITCH #3
Sensitivity high
Sensitivity low
(mounting height< 2.2m)
Passive output (NC)
Active output (NO)
Hold time: 2 s
Hold time: 0.5 s
The drawings show the maximum sensing field dimensions. If you install the FLY without accessories (FCA or FSA),
you can move the sensing field position by tilting the sensor to select the required vertical tilt angle. Otherwise, this
adjustment is not possible.
To adjust the sensing field, use the
masking lens. To tailor the sensing
field, cut the segments.
Use the guide pins to insert the
masking lens on the front cover.
Position the screwdriver as shown
to remove the masking lens.
SENSING FIELD SETTINGS
EXAMPLES:
door threshold
door threshold
DETECTION AREA
N
O D
E
TE
C
TI
O
N
NO DETECTION
DETECTION AREA
FRONT VIEW
FLAT VIEW
Door threshold
height
