2. After a measurement is finished or when the device is in standby mode, the user
can press button ‘
M
’ to recall memory. Press button ‘
M
’, the display will show
the average value of the last 3 readings taken as Fig. 5.
3. Press again, the display will show ‘01’, which means the last reading taken,
then turns to another screen to show readings and measuring date and time as
Fig. 6.
4. Press again, the display will show ‘02’, which means the second to the last
reading taken.
8.2 Memory Clearance
After a measurement is finished or when the device is in standby mode, press and
hold button ‘
M
’ for at least 5 seconds, the display will show ‘Clr’ which means the
stored readings for ‘M’ are removed. Fig. 7.
Fig. 5
Fig. 6
Fig. 7
