background image

BE-XXMS USER MANUAL     

3

INTRODUCTION

Guide to this Manual 

This manual contains all the information necessary to safely operate and maintain the Agriease 23MS or 

32MS Spreader. Consult the Table of Contents for a detailed list of topics covered. You’ll find this manual’s 

step-by- step procedures easy to follow and understand. Should questions arise, please contact Braber 

Equipment before starting any of the procedures in this manual. 

NOTE:

 Procedures provided in this manual apply to both spreader models (Model 23MS and Model 32MS) 

unless specifically noted otherwise. 

Regarding the information presented in this manual:
All safety, operating, and servicing information reflects current production models at the time of publication 

of this manual.
References made to left, right, front, and rear are those directions viewed when facing the unit from the rear. 

Please read all sections in the manual carefully—including the important safety information found in this 

section—before beginning any procedures; doing so ensures your safety and the optimal performance of 

your Agriease Spreader. 

For Your Safety...

For your safety, Agriease documentation contains the following types of safety statements (listed here in 

order of increasing intensity): 
NOTE: A clarification of previous information or additional pertinent information. 

ATTENTION: 

A safety statement indicating that potential equipment damage may occur if instructions are not 

followed. 

CAUTION: 

A safety statement that reminds of safety practices or directs attention to unsafe practices which could 

result in personal injury if proper precautions are not taken. 

WARNING: 

A strong safety statement indicating that a hazard exists which can result in injury or death if proper 

precautions are not taken. 

DANGER! 

The utmost levels of safety must be observed; an extreme hazard exists which would result in high 

probability of death or irreparable serious personal injury if proper precautions are not taken. 

The best operator is a careful operator. Use common sense and observe general safety rules. 

In addition to observing the specific precautions listed throughout the manual, the following general 

precautions apply and must be heeded for proper, safe operation. 

WARNING:

Keep hands and feet from under the spreader at all times. Ensure that you are safely distanced from any 

other persons before operating the spreader. 

WARNING:

DO NOT attempt to operate the spreader in areas with steep inclines, ditches,
large rocks, stumps, or holes which may endanger the operator by upsetting the tractor or cause damage to 

the spreader. 

WARNING:

To prevent serious personal injury and to promote safe spreader operation, keep all shields in place during 

operation. Ensure that all mounting hardware is properly tightened. 

WARNING:

Never clean, adjust, or repair the spreader while the tractor is running. 

Summary of Contents for AgriEase BE-23MS





















Reviews: