background image

7

WARNING

AIR TANK WARNING:

 Drain liquid from air tank 

daily, or after each use, using the drain valve located 

on the bottom of the lower air tank. Failure to properly 

drain liquid from the tank will cause rust from moisture 

buildup, which weakens the tank and could lead to a 

violent tank explosion, Periodically inspect the tanks for 

unsafe conditions such as corrosion.

Never attempt to repair or make modifications to the tank or its 

attachments. Welding, drilling or any other modifications may weaken 

the tank, which may result in damage from rupture or explosion. Never 

remove or attempt to adjust the pressure switch, safety valve, or other 

factory set operating pressures.

WARNING

FIRE WARNING:

 Avoid dangerous environments. Do 

not use compressor near gasoline or other flammable 

materials. Keep work area well lit. Normal sparking of 

a motor or sparking from grinding metal could ignite 

fumes. Do not spray flammable materials in the vicinity 

of an open flame or other ignition source, including the 

air compressor itself. Do not direct paint or other spray 

material towards the compressor.

Read and follow all safely instructions for the material you are spraying. 

Be sure to use an approved respirator designed for use with your 

specific application.

WARNING

BREATHABLE AIR WARNING:

 This air compressor in 

not designed, nor intended for the supply of breathable 

quality air. Air produced by this unit may contain carbon 

monoxide or other toxic vapors. 

Do not inhale air from the compressor or from a breathing device 

connected to it.

safety

Summary of Contents for AC1511B





















Reviews: