Seite
22
von
27
5.
ADJUST HUMIDITY
Set the desired humidity level. Each time the button is pressed, the humidity
increases by 5% from 40% to a maximum of 80%. As soon as the desired humidity
is reached, the device stops producing fog. Once the desired humidity level is
reached, the device stops working and enters the Standby Mode. If the humidity
level is 5%RH lower than the desired humidity level, the device will automatically
start working again to keep the target humidity level.When desired humidity level is
set and start working, it will keep humidifying for 2 minutes no matter the room
humidity reach the desired humidity or not. After 2 minuts, it will stop if the humidity
level is higher than the desired level.
Please note
When you switch on the device, the device humidifies, regardless of whether the room
humidity reaches the set humidity or not.
6.
ION-MODE
The humidifier is equipped with a negative ionizer. This distributes ionized air into the
rooms and removes static charges.
To start the ionizer function, press the ION button
the display lights
up.
To stop the function, press the ION button again.
7.
UV-MODE
The humidifier is also equipped with a UV function, this cleans the air and frees it from
bacteria, germs and viruses. The emerging mist is thus disinfected.
To start the UV function, press the UV button
the display lights
up.
To stop the function, press the UV button.
8.
NIGHT-MODE
When the humidifier is switched to night mode, the display switches off and the
device continues to run in the mode you have set. To turn on the Night-Mode press
the Night-Mode button to turn off the Night-Mode press any button.
9.
AUTO-MODE
This product maintains the relative humidity at 55%~68%. The humidifier will choose
the best humidifying method according to different room ambient humidity.
To activate the auto mode, press and hold the AUTO button for approx. 3 seconds
the display lights
up.
To stop the function, press the AUTO button again
