Seite
24
von
28
CLEANING INSTRUCTIONS
Before cleaning the device, switch off the humidifier, pull the power plug and then wait
approx. 10 minutes until the device has completely cooled down.
Cleaning Reminder:
The BECOOL air humidifier has an automatic cleaning reminder, which after
approx. 50 operating hours signals that the device needs to be cleaned.
The device locks itself until you have finished cleaning.
The LED indicator flashes every 2 seconds to remind you to clean the humidifier.
Now clean the device according to the instructions below.
As soon as you have finished cleaning, press and hold the ON / OFF button
for approx. 3 seconds to exit the cleaning mode.
Press the ON / OFF button again to start up the device as usual.
Cleaning the case:
• Clean the device with a soft, moderately damp cloth and then wipe it with a dry cloth.
Cleaning the base/water pan:
• Remove the water tank from the base to expose it.
• Always empty the water in the direction of the marking in the
base, otherwise water could get inside the device and damage the
device:
• If dirt remains in the base, pour some clear, fresh water into the base and use
a sponge to remove the dirt. Then pour the water out over the marking again.
• Now wipe the inner part of the base with a moderately damp cloth and then
dry it with a soft cloth.
Cleaning the water-mist converter
• The mist converter is located in the middle of the water tub - this must be cleaned
regularly so that the device generates the mist correctly.
• If the water quality at your location is hard, use a lime and scale dissolving cleaner
such as white vinegar or cider vinegar. (do not use dark vinegar)
• Depending on how dirty it is, put more or less cleaner on the surface of the
converter and fill the tub with water.
• Leave the cleaner and water on the converter for 10 to 15 minutes act.
• Clean the converter with a brush until the deposit is removed.
• Rinse twice with water.
• Do not use any metallic or hard objects for cleaning, which could damage the
converter!
