Seite
22
von
28
3.
WARM FOG
Activate the warm fog by pressing this button. The PTC heating element in the
machine will now start to heat the mist in the device
the display lights
up.
If you want to turn the function off, press the WARM FOG button again.
4.
TIMER
You can use the timer to switch off the device in a time-controlled manner. Each
time you press the button, the timer increases by 1 hour to a maximum of 12 hours
the display lights
H
up.
To switch off the timer, press until "0" appears on the display.
5.
ADJUST HUMIDITY
Set the desired humidity level. Each time the button is pressed, the humidity
increases by 5% from 40% to a maximum of 80%.
the icon
lights up. As soon
as the desired humidity is reached, the device stops producing fog.
Once the
desired humidity level is reached, the device stops working and enters the Standby
Mode. If the humidity level is 5%RH lower than the desired humidity level, the
device will automatically start working again to keep the target humidity level.
When desired humidity level is set and start working, it will keep humidifying for 2
minutes no matter the room humidity reach the desired humidity or not. After 2
minuts, it will stop if the humidity level is higher than the desired level.
Please note
When you switch on the device, the device humidifies for two minutes, regardless of whether
the room humidity reaches the set humidity or not.
6.
AUTO-MODE
This product maintains the relative humidity at 55%~68%. The humidifier will choose
the best humidifying method according to different room ambient humidity.
To activate the auto mode, press the auto button
the display lights
up.
To stop the function, press the AUTO button again.
7.
NIGHT-MODE
When the humidifier is switched to night mode, the display switches off and the device
continues to run in the mode you have set. To switch the night mode on press the
NIGHT MODE button for approx. 3 seconds.
To stop the function, press any key.
