29
History
Clicking History opens a list of saved configurations.
By entering a patient identifier and clicking Find
you can filter the records. This feature enables the
recovery of previous settings for resending to the
hand or providing a base to work from.
Send to Hand
With the BT Dongle inserted and configured, and the
bebionic hand activated, a stream of signals begin
transmission. The hand will automatically disconnect
after every successful Send to Hand. The success or
failure of the process will be shown on the screen.
The user will be required to follow steps outlined
in section 5.8 to re-connect the Bluetooth
communication to the hand if further programming
is needed.
Read from Hand
This feature enables the current hand configuration
to be read from the hand and stored in the history file.
Following a read you are required to enter a patient
identifier. This enables retrieval of the specific patient
configuration, if desired.
Bluetooth
This enables connection of the Bluetooth
communication to the hand. When a connection is
made the message box will be highlighted in green
(shown above). If there is no connection with the hand
the message box will be highlighted in red (shown
below). See section 5.8 for further information.
