13
The bebionic glove is made from a multi-layered, variable hardness, silicone-based material, lined with fabric mesh.
This construction resists soiling, wear and puncture damage.
bebionic gloves provide high compliance with gripped objects. The fabric liner allows the glove to slide over the
joints during motion, this reduces the amount of power need to drive the hand and conserves battery life.
The standard glove is supplied in 19 skin tones and in a solid black color. bebionic gloves provide an additional
barrier to dirt, dust and moisture ingress to the hand. Direct exposure to water, or situations where dirt and dust
are prevalent should be avoided as these have the potential to interfere with or damage the hands performance.
The bebionic glove has been designed
specifically for use with the bebionic
hand. The use of other gloves may
damage the hand and will void the
warranty.
CAUTION
!
3.0 bebionic Glove
Care
Take care when fitting and using the bebionic glove. Try to
avoid contact with sharp or pointed objects.
High Definition Nails
Silicone gloves have nails painted by hand following the
manufacturing process.
We do not recommend the use of polystyrene nails attached
with Cyano-acrylic glue as attempts to remove the nails
bonded with this adhesive will permanently damage the
glove.
Cleaning
General soiling can be removed with soap and water. After
cleaning remove all traces of the cleaner and wipe the
surface dry. Most dyes will be fully removed by this process.
A liquid domestic fabric softener can be diluted to reduce
the ‘tackiness’ of the surface. The material used will resist
most staining media.
For any other enquiries please contact your local supplier.
3.1 Care Instructions
