BE Ag & Industrial MFS350T, Operations & Parts Manual

Page: 18 / 22

18
MFS350T USER MANUAL
MAINTENANCE
• After each use clean material out of hopper.
• Rinse/dry inside and outside of the spreader after each use.
• Before operating make sure the tires have the RECOMMENDED TIRE PRESSURE.
• Periodically check all fasteners for tightness.
• Annually clean and lightly lubricate parts.
• Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.
• Never exceed load capacity rating of 250lbs it will damage the spreader.
NOTE: The gearbox is filled and sealed at the factory. If operated and stored properly, the gearbox will
provide trouble-free service. If the gearbox is disassembled it is important it be re-filled with quality grease
and the box halves are resealed with silicone adhesive.
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer’s specifications. Replacement parts
that do not meet specifications may result in a safety hazard or poor operations.
STORAGE
• Never allow material to remain in the hoper for extended periods of time.
• Before storing make sure the spreader is clean and dry for years of trouble-free service.
• Store indoors or protected area during severe weather and winter months.
WARNING
ALWAYS maintain the proper tire pressure.
DO NOT over or under inflate the tires as serious injury may result.
ALWAYS keep the tires at 300PSI.