background image

4     

BE-MTR2 USER MANUAL

SAFETY

Special safety precautions must be observed when working with the machine.
1.  Demand for protective clothing

• Clothing must be sturdy and snug-fitting;
• Wear flanged cap, wear dirt/fog-proof glasses;
• Wear Long boots or no-slippery shoes, prohibited wear slip-on shoes to operate.

2.  Do not operate the machine in no accordance with these

• Person without knowledge of the machine;
• Over-tired or patients;
• Drunk;
• Children.

3.  Avert fire

• Stop the machine when fill the fuel, prohibited fire and smoke;
• Keep away fuel from the fire.

4.  Preparation before operating

• Check whether the screws and nuts are loose: check whether the passage is good.
• Inspected all control rod and safe devices whether they are assembled right.
• Prohibited using the machines which have fault.

5.  Start-up

• Make sure there is no others in the work area;
• When the machines recoiled start, you must keep away from tines and close upon it, prevent it from 

moving, and make sure it is safe.

6.  Safe operation

• When use the machine, please keep right posture, close upon the handle;
• When operating, forbid anybody enter the work area;
• While the weather raining, please take care of the slippery ground;
• When the tines is locked, please power off the machine, start again after clean it off;
• When scarifying, please move ahead and counter-march is prohibited;
• When change the work area, stop the machine, then check whether the screws and nuts are loose.

7.  Examine and Repair

• Make sure the professional person maintains the machine;
• Should inspect the machine termly, if appear abnormity when operating, must stop the machine for 

repairing at once;

• Need for repairing or service, please contact our SuperHandy customer service center  

by 1-866-493-0524 for assistance.

Summary of Contents for BE-MTR2















Reviews: