BE-VBM220 USER MANUAL
11
Storage
At the end of the working season or when the mower will not be used for a long period, it is good practice
to clean off any dirt or grease that may have accumulated on the mower and any of moving parts.
1. Clean as necessary.
2. Check knives for wear and replace if necessary.
3. Inspect mower for loose, damaged or worn parts and adjust or replace as needed.
4. Store unit inside if possible for longer life.
5. Repaint parts where paint is worn or scratched to prevent rust.
6. Replace all damaged or missing decals.
Lubrication
• Driveline Shaft U-Joints
Type of Lubrication: Multi-Purpose Grease
• Roller Bearing (Both Ends)
Type of Lubrication: Multi-Purpose Grease
• Cutter Rotor Bearing (Both Ends)
Type of Lubrication: Multi-Purpose Grease
• Driveline Profiles
Type of Lubrication: Multi-Purpose Grease
• Gearbox
Type of Lubrication: SAE 90W Gear Lube
Check oil level in gearbox by removing the plug located on the
right hand side. Oil should be level with bottom of plug hole. Add
oil if necessary by removing top fill plug and side plug. Add oil until
it flows from side plug hole.
Do not overfill!
IMPORTANT:
Mower should be level when checking oil in gearbox!
SPECIFICATIONS & CAPACITIES
Uses:
The Verge Flail Mower is a flail mower with a hydraulic arm for clearing larger, wider areas, roadside verge,
orchards and various inclining and declining land surfaces. Specifically designed for universal use, the head
of the mower can be operated in line with the tractor or offset for verge maintenance and field boundaries.
MODEL
VBM-140D
VBM-160D
VBM-180D
VBM-200D
VBM-220D
Structure Weight
644kg
672KG
705kg
705kg
804kg
Tilt-Up
90°
Tilt-Down Angle
53°
Cutting Width
1400mm
1600mm
1800cm
2000cm
2200cm
Final Type
Hammer
Number of Flails
12
14
16
18
20
Vertical Extending
Distance
1780mm
1980mm
2180mm
2380mm
2880mm
Horizontal Extending
Distance
2345mm
PTO Speed
540r/min
Trator HP
50-85hp
70-110hp
80-110hp
90-120hp
