6
BE-TRXX USER MANUAL
ADJUSTMENT FOR SPREADING AND TEDDING
1. Tines
Put the tines in the tedding position by moving the tine shaft. Check all tines
are in the correct position.
2. Wheels
The wheels must be in the lower or middle position, for this operation; i.e.
the machine will be in its highest position.
3. Top Link
The top link is attached in the lower hole of the hitch-frame.
When the points of the tines exactly touch the stubble in front of the top link
is correct.
At 430 RPM of the PTO the tines have reached their lowest position.
4. Swath Deflectors
If required either one or both deflectors can be used to separate the swaths.
This is particularly useful when working the outsides of a field.
5. Locking Device
Disconnect the locking device.
