4
BE-TRXX USER MANUAL
Remember, you are the key to safety. Good safety practices not only protect you but also the people around
you. Make these practices a working part of your safety program. Be certain EVERYONE operating this
equipment is familiar with the recommended operating and maintenance procedures and follow all safety
precautions.
Most accidents can be prevented. Do not risk injury or death by ignoring goof safety practices.
Machines must never be tested on a tractor in an enclosed space because of the danger from exhaust fumes!
Always check traffic and operational safety before putting the machine into operation.
Adhere to the general rules of health and safety precautions besides the advice of this manual.
The installed warning and advisory signs give important hints for a safe operation; adhering to these serves
your own safety.
Keep safety decals and signs clean and legible at all times.
Replace safety decals and signs that are missing or have become illegible.
If original parts on which a safety decal or sign was installed are replaced, be sure that the replacement part
also displays the current decal or sign.
When making use of public roads adhere to applicable traffic rules.
Become acquainted with all installations and control devices as well with the function BEFORE starting
operation.
The clothing of the operator should be tight. Avoid wearing any loose clothing.
Before beginning to drive and/or operate, check surrounding area (children!) Ensure sufficient during all
operation and transport.
No one shall drive on the machine during transport and/or operation.
Attach accessories in accordance with mounting instructions and only to the appropriate attaching points.
Special care shall be taken when (dis)mounting the machine on/off the tractor.
When attaching/detaching the machine, place the jack stand into the corresponding position.
Always fit front weights to the fixing points provided for that purpose.
For road transport, bring machine in a transport position and secure it.
Install and check transport equipment, e.g., lighting, warning devices and guards. Adhere to maximum
permissible axle loads, total weights and transport dimensions.
Never leave the operator’s seat during operation or transport.
Moving behavior, steer ability and braking performances are influenced by mounted implements and ballast
weight. Ensure sufficient braking effect and safe manageability.
Always adapt the speed to the local conditions. When making short turns note the larger radius because of
increased width or length of the combination as well as mass and inertia changes due to the other center of
gravity position.
No one should operate the machine unless all protection is installed and in functional position.
Never stay or allow anyone to stay within the operating area.
Never stay or allow anyone to stay within the turning and slewing area.
Before leaving the tractor, lower the machine onto the ground, apply the parking brake, shut down the
engine and remove the ignition key.
Allow nobody to stay between tractor and machine unless the tractor is prevented from inadvertent rolling
away by applied parking brake and/or placed chocks.
Store the unit in an area away from human activity.
Do not permit children to play on or around the stored unit. Use the provided jack supports, store in sable
machine mode.
