12
Step 2:
Remove all loose parts included in the container, e.g. wheels and hardware box.
Step 3:
Use scissors or a knife to cut and remove the straps securing the parts to the beam or tank assembly,
including tongue assembly and log tray assemblies. Put them aside for assembly.
NOTE:
DO NOT remove the strap securing the hydraulic hoses assemblies to the beam at this time, until you do the
assembly procedure of the hoses.
Step 4:
Use scissors or a knife to cut and remove the straps securing the engine box to the crate bottom, and then
place aside carefully for assembly.
Step 5:
Use a pry bar or claw hammer to remove the plywood splinters securing the beam and tank assemblies on
the crate bottom. Take out the two heavy assemblies.
NOTE:
Due to the weight / size of the two assemblies, it’s recommended two or more adults to assist lifting and
moving the two assemblies. Lifting tools as hoist, crane, jack, etc. are recommended too.
Step 6:
Inspect all component assemblies, parts and accessories according to the packing list attached in this
manual (Page 35). Make sure all items listed in the packing list are included and of no shipping damage.
NOTE:
DO NOT discard the packing materials until you have carefully inspected and satisfactorily operated the tool.
