BDV Phantom 800, User Manual, Page: 35 / 78

. . . . .
I N S T A L L A T I O N I N S T R U C T I O N S
Startup Macro
Phantom 800 User Guide Edition 1.06
29
IPADDR 192.168.1.103
The Phantom 800 is assigned the static IP address 192.168.1.103.
5 Set the static IP address of the control computer. If you are using Microsoft Windows,
follow these steps:
a Click Start > All Programs > Accessories > Communications > Network Connections.
The Network Connections window appears.
b Right-click on Local Area Connection and select Properties.
The Local Area Connection Properties window appears.
c Click on Internet Protocol (TCP/IP) to highlight it and click Properties.
The Internet Protocol (TCP/IP) Properties window appears.
d Select Use the following IP address and enter an address in the IP address field.
For example, enter 192.168.1.10 .
e Click on Subnet mask and the number 255.255.255.0 should appear.
f Enter the static IP address in the Default gateway field.
For example, enter 192.168.1.1 .
g Click OK.
The static IP address of the control computer is set.
6 Open the Mozilla Firefox web-browser and type the Phantom 800 IP address set in Step
4 into the address bar of the browser and press Enter.
The GUI will be invoked and control of the Phantom 800 is now done through the GUI. Details
of the web-server GUI controls are in Chapter 6, “Matrix Switching,” and Chapter 9, “Frame
Grabbing.”
Because the Phantom 800 now has a static IP address, the RS-232 interface is no longer
required. If the IP address of the Phantom 800 is misplaced, simply reconnect the RS-232
controls and use the
SHOWNET
command to retrieve the IP address.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S T A R T U P M A C R O
The Startup Macro feature allows the user to set up a list of commands that will be executed
automatically by the Phantom 800 after it is powered on, or after a power cycle or