BDV Phantom 800, User Manual, Page: 28 / 78

I N S T A L L A T I O N I N S T R U C T I O N S
Final System Installation
22
Edition 1.06 Phantom 800 User Guide
• Surge protector (recommended)
• Line conditioner (recommended)
D E S C R I P T I O N
Begin your final system installation by connecting the Phantom 800 to an AC power supply
and powering it up.
1 Connect the power cord (supplied) to the AC input on the Phantom 800.
2 Plug the power cord into a surge protector (recommended).
3 Plug the surge protector into a conditioned AC power source.
4 Turn on the Phantom 800 using the power switch on the rear panel.
S t e p 2 : C o n n e c t A l l D V I I np u t s
W H A T Y O U W I L L N E E D F O R T H I S S T E P
• All DVI video input sources you want to display through the Phantom 800
• All non-DVI video sources you want to display through the Phantom 800
• DVI converters for the non-DVI video sources
• DVI cable
D E S C R I P T I O N
Connect all DVI sources directly to the Phantom 800 input channels. All non-DVI sources
must first be converted to a DVI signal before they connecting them to the Phantom 800.
See Figure 6, “System Installation Illustration,” on page 21 for an example of a typical
Phantom 800 installation.
1 Connect any DVI signals directly to Phantom 800 input channels.
2 Apply DVI converters to any non-DVI signals and connect the output of the converters
to input connectors on the Phantom 800.
S t e p 3 : C o n n e c t P h a n t o m 8 0 0 O u t p u t s t o A l l D i s p l a y s
W H A T Y O U W I L L N E E D F O R T H I S S T E P
• All DVI-capable display devices you want to use in your installation
• DVI cable
• (Optional) DVI signal conditioners. If the distance to the display requires more than 5
meters of DVI cable, a Black Diamond Video DVI X-treme Cable Kit should be used