4
EKF Series 300/500/600
GB
Safety warning structure
The following warnings are used in these
operating instructions:
DANGER
A warning of this category indicates
an impending dangerous situation .
If the dangerous situation is not avoid-
ed, it may lead to serious injury or even
death.
►
Follow the instructions in this warning
to avoid possible danger of serious
injury or even death.
WARNING
A warning of this category indicates a
potentially dangerous situation .
If the dangerous situation is not avoid-
ed, it may lead to serious injury or even
death.
►
Follow the instructions in this warning
to avoid possible danger of injury to
persons.
ATTENTION
A warning of this category indicates
potential danger to property .
If the situation is not avoided, it may lead
to material damage.
►
Follow the instructions in this warning
to avoid material damage.
NOTE
►
A note indicates additional information
that simplifies the use of the machine.
Intended use
The machine is only intended for cutting
chamfers or curves. For this purpose, the
machine must held by both hands and
guided over the material to be processed.
Any use other than previously stated is
considered as improper use.
WARNING
Danger due to improper use!
If not used for its intended purpose and/
or used in any other way, the machine
may be or become a source of danger.
►
Use the machine only for its intended
purpose.
►
Observe the procedures described in
these operating instructions.
No claims of any kind will be accepted for
damage resulting from use of the system
for other than its intended purpose.
The risk must be borne solely by the user.
NOTE
►
If used commercially, pay attention to
compliance with the accident preven-
tion and occupational safety regula-
tions.
General instructions
