BDI Icon 9422 Assembly Instructions Download Page 4

Page: 4 / 4

Use 3 x C

Bottom Shelf Glass:

Use 3 x A

Step 5

Install Glass shelves.

Use appropriate hardware. Apply

Felt washers to the stainless pucks
prior to glass installation.

PLEASE READ:

leave glass screws loose
until all screws have been
installed.

Then tighten securely.

It may be necessary to loosen shelf
brackets to obtain proper fit. Once

Glass Shelves and Top are fitted,
Please be certain to go back and
tighten all screws!

Shelf Glass:

Use 3 x B

Use 3 x C

Top Glass:

Use 3 x C

Use 3 x A

Becker Designed Inc.

14101-A Parke Long Ct

Chantilly VA 20151

www.bdiusa.com

Summary of Contents for Icon 9422

Page 2: ...upside down Install Levelers x 4 Adjust Levelers so base is level and stable F x 4 J H G A x 2 I x 4 D x 2 Step 1a x 2 E Step 1a 1b Install the C frame 1a Attach mounting plate to the upper and lower ends of C frame 1b Attach C frame oriented properly Bottom of C frame has 2 holes and top of frame has 1 hole J J Step 1b ...

Page 3: ...not necessary to remove the back panel J D x 12 brackets D x 3 J D Step 3 Install Back panel Back panel is to be installed with small holes facing backward BDI label should be on bottom left corner of Back panel Wire management straps Velcro straps are supplied to control cables They can be screwed into the small holes on the back panel in location desired L K ...

Page 4: ...leave glass screws loose until all screws have been installed Then tighten securely It may be necessary to loosen shelf brackets to obtain proper fit Once Glass Shelves and Top are fitted Please be certain to go back and tighten all screws Shelf Glass Use 3 x B Use 3 x C Top Glass Use 3 x C Use 3 x A Becker Designed Inc 14101 A Parke Long Ct Chantilly VA 20151 www bdiusa com ...