BDI Icon 9422 Assembly Instructions Download Page 2

Page: 2 / 4

Step 2

Install frame onto base.

Use shown hardware to attach base to

frame. Base is easiest to install if unit
is turned upside down.

Install Levelers x 4

Adjust Levelers so base is level and

stable.

x 4

x 2

x 4

x 2

Step

1a x 2

Step 1a + 1b

Install the C-frame.

Attach mounting plate to the upper and lower

ends of C-frame.

Attach C-frame oriented properly, (Bottom of

C-frame has 2 holes and top of frame has 1 hole)

Step
1b

Summary of Contents for Icon 9422

Page 2: ...upside down Install Levelers x 4 Adjust Levelers so base is level and stable F x 4 J H G A x 2 I x 4 D x 2 Step 1a x 2 E Step 1a 1b Install the C frame 1a Attach mounting plate to the upper and lower ends of C frame 1b Attach C frame oriented properly Bottom of C frame has 2 holes and top of frame has 1 hole J J Step 1b ...

Page 3: ...not necessary to remove the back panel J D x 12 brackets D x 3 J D Step 3 Install Back panel Back panel is to be installed with small holes facing backward BDI label should be on bottom left corner of Back panel Wire management straps Velcro straps are supplied to control cables They can be screwed into the small holes on the back panel in location desired L K ...

Page 4: ...leave glass screws loose until all screws have been installed Then tighten securely It may be necessary to loosen shelf brackets to obtain proper fit Once Glass Shelves and Top are fitted Please be certain to go back and tighten all screws Shelf Glass Use 3 x B Use 3 x C Top Glass Use 3 x C Use 3 x A Becker Designed Inc 14101 A Parke Long Ct Chantilly VA 20151 www bdiusa com ...