BDCOM S5864H Hardware Installation Manual
Figure 3-13 Connecting 100GE QSFP28 optical ports (configured to be 4 10GE ports)
and other Ethernet terminals
1.3.6 USB Interface
S5864H provides with 1 USB2.0 interface.
Figure 3-14 Connecting USB2.0 interface
3.4 Checking After Installation
Before electrically starting up the switch, perform the following checkups after the
switch is installed:
If the switch is installed on the cabinet, check whether the installation point
between the cabinet and the switch is strong. If the switch is installed on the
desk, check whether there is enough space for the switch to discharge its heat
and whether the desk is stable.
Check whether the connected power meets the power requirements of the
switch.
Check whether the grounding line is correctly connected.
- 16 -
