BDCOM S5864H Hardware Installation Manual
Figure 3-5 The inner connection of the 1-to-8 RJ45 cable (RLC0301)
3.3.2 Connecting 10GE Ethernet SFP+ Ports
The BDCOM S5864H switch has 48 10GE SFP+ ports. Each port has its
corresponding indicator: 1~48. You can connect the SFP+ optical module to the SFP+
port and then you can connect other Ethernet terminal devices through the optical
cable.
Figure 3-6 Connecting the 10GE SFP+ port and other Ethernet terminals
Caution:
The switch shown in figure 3-5 does not represent the material S5864H.
3.3.3 Connecting Ethernet Management Ports
BDCOM S5864H provides 1 10/100/1000Base-T port. Each port has its corresponding
MNG indicator. The indicators are used to indicate the LINK/ACT state. The ports can
connect other Ethernet terminal devices through the UTP port and the direct-through or
cross network cable. The numbering order of the pins in the UTP port is the same as
that in the console port. See figure 3-6.
- 12 -
