BD BD FACSPresto Instructions For Use Manual Download Page 28

Page: 28 / 96

BD FACSPresto Near-Patient CD4 Counter Instructions For Use

When not in use, plug the solar generator into a wall electrical
outlet or other electric source. This ensures that the solar
generator is charged for the next use.

Power connection
using a solar
generator

The solar generator can be used without the solar panel, as another
power supply.

To connect power to the instrument using the solar generator:

1. Plug solar generator into a wall electrical outlet or car charge

battery adapter.

For a full charge of the solar generator, keep it plugged in for
6 hours.

2. Connect the solar generator and instrument.

Instrument startup

Press the power button on the front of the instrument to turn it on.

Summary of Contents for BD FACSPresto

































































































Search results

Summary of Contents for BD FACSPresto

Reviews:

Related manuals for BD FACSPresto

Brands by name

Popular brands

BD BD FACSPresto, Instructions For Use Manual

Search results

Summary of Contents for BD FACSPresto

Reviews:

Related manuals for BD FACSPresto

Brands by name

Popular brands