BD BD-1272, Owner'S & Parts Manual

Page: 18 / 36

18
T
UR
N
WARNING
Always disconnect the unit from the power supply.
Blade Replacement
1. Remove knobs on outer blade guard.
2. Remove the Blade Guard.
3. Use the open wrenches provided with this unit. Place wrench (A) over the flats on blade shaft
(located on the inner side of the blade). Hold the wrench stationary. Place wrench (B) on the Hex
Screw at the end of the blade shaft. Turn wrench (B) counter-clockwise to remove the screw.
4. Replace the blade and ensure that the blade is oriented with the arrow in a counterclockwise
position. Tighten the screw clockwise to secure the new blade.
5. Rotate the blade by hand to check it for tightness.
A
B
BLADE
INNER GUARD
BD-1272 RAIL SAW MAINTENANCE