8
|
SETTING TIMER
SELF-CLEANING MODE
Timer range:
1-24 hours
Default timer:
1 hour
Set ON timer:
When in standby mode, the timer sets the time until the ice making process begins.
1.
When on standby, press the TIMER/CLEAN button, then use the
(+)
and
(–)
buttons to increase or
decrease time.
2.
To adjust or cancel a timer: Press the TIMER/CLEAN button and increase/decrease the time, or press
TIMER/CLEAN button again to cancel.
Set OFF timer:
When unit is operating, the timer sets the time until the ice making process ends.
1.
When unit is operating, press the TIMER/CLEAN button, then use the
(+)
and
(–)
buttons to increase
or decrease time.
2.
To adjust or cancel a timer: Press the TIMER/CLEAN button and increase/decrease the time, or press
TIMER/CLEAN button again to cancel.
•
Press and hold the TIMER/CLEAN button for 5 seconds to enter self-cleaning mode which lasts for
20 minutes. The machine will pump water through the unit to clean it.
•
After 20 minutes, the water pump will stop and the unit will automatically refill the water tank.
MANUALLY DRAINING WATER
1.
Pull out the water drain pipe from the right side of the water tank. Water will flow into the ice bin and
out the water outlet.
2.
To drain water in the water circulation tank, run an ice-making program or self-cleaning mode.
Water will flow into the water tank and ice bin, then out the water outlet.
OPERATING INSTRUCTIONS
1.
Press the ON/OFF button to turn on the ice maker and it will automatically start filling the water tank
to begin the ice making process.
-
If manually filling with water, open the lid and fill the water tank to max capacity
(approximately 3.5 liters). Refill every 2 to 3 hours.
2.
The top left display will show the ambient temperature (°F) or the time left in the ice making cycle (minutes).
The right display will show ice-making settings.
3.
Press the
(+)
and
(–)
buttons to adjust ice thickness by increasing or decreasing the time of the ice
making cycle (i.e. for thicker ice increase time and for thinner ice decrease time).
4.
Ice making will continue until the unit is turned off, at maximum capacity, or there is insufficient water.
NOTE:
The initial ice making cycle may take up to 30 minutes, but a typical cycle is approximately 11 to
20 minutes.
